posted
I had the same problem as alot of people with my 323 i have tryed every thing, different tanks,longer,shorter fuel lines different pipes nothing helped so i was going to put the 3.3 back in the revo but i broke the engine mount so i was reinstaling the RB and i just happend to check the needle valve and it was loose. the fuel nipple on the needle you could just move. i tightened and no more leaning problem
Posts: 1 | From: woodbridge VA | Registered: Dec 2006
| IP: Logged
posted
the answer for these is to cut a little bit of the inside wall of the stock tank of the revo, and to open the LSN it worked for me OK it showld work for you, the best about these is that you dont have to buy extra parts to solve the problem i hope these help you!
posted
RBrevoMAN: Do you have a picture or a drawing of that solution ??, It sounds like a interresting solution...
(I don't have the problem, but it might be good for people to try your solution before they spend money on new tanks ect.)
Posts: 40 | From: Denmark | Registered: Apr 2006
| IP: Logged
UBBFriend: Email this page to someone!
