RB Concept Forums: Traxxas 40mm flywheel

my profile | directory login | search | faq | forum home

»	RB Concept Forums » RB Concept .23 engines » Traxxas 40mm flywheel

UBBFriend: Email this page to someone!

Author

Topic: Traxxas 40mm flywheel

justinn
New Member

posted

Anyone know if the traxxas 40mm flywheel will fit on the rb with no problems at all hitting the carb? Also, can you post a link to a backplate for the tm323 if there is one? Thanks

Posts: 3 | From: cherry hill nj | Registered: Dec 2005 | IP: Logged

myrc
Very Active Member

posted

Part # RBC1901-323210 Backplate http://www.acehardwarehobbies.com

Dont know about the 40 mm flywheel working or not but the standard one should work fine.

[ 29. December 2005, 07:43: Message edited by: wannabe ]

--------------------
MP777 SP2,Mugen MBX5T Prospec, (C6BBT7 & WS711)

Posts: 132 | From: Yakima Washington | Registered: Apr 2005 | IP: Logged

Twat
New Member

posted

I just installed the trx #4142X 40mm flywheel and it cleared the RB carb by about 0.5mm (0.020"). This is not very much clearance but it's good enough. This is a much better flywheel for starterboxes.

Posts: 18 | From: Santa Cruz | Registered: Aug 2005 | IP: Logged

shlum
New Member

posted

Twat did u have to mess again with the carb for the flywheel to work because i hear other pople asying that they had to shim the flywheel.

Posts: 30 | From: Haiti | Registered: Sep 2005 | IP: Logged

bmitchell138
New Member

posted

I just installed the 40mm flywheel on my RB and it just cleared the carb, and I did not have to move the carb.

Posts: 7 | From: Huntsville,AL | Registered: Jan 2006 | IP: Logged

UBB.classic™ 6.7.2