posted
Noticed the Revo was idling high after a few high speed passes. Turned out the LSN was closed shut. Reset it to factory spec (6 turns out) and tuned again. After a few passes, it shut again! Is there anything I can do to prevent it from closing? The LSN seems to be a bit loose... Help!
Posts: 12 | From: Connecticut | Registered: May 2005
| IP: Logged
posted
Checked the o-ring and it didn't appear to be damaged, and it looked to be in pretty good shape. I cleaned it but won't get a chance to test it until next week. I will report back. At the meantime any ideas pls shoot this way! Thx!
Posts: 12 | From: Connecticut | Registered: May 2005
| IP: Logged
posted
I had this problem and put just a tiny bit of thread lock on the threads and it stopped.Cant actually say what caused it but came to the conclusion that the cleaner I had used dryed the oring and caused it to fail,same with my bellow.I had some other issues after that such as my engine flooding out soon as I would start it which I think had something to with the lsn letting to much fuel in.I just replaced the carb.
UBBFriend: Email this page to someone!
