posted
Hello everyone, I just have a few questions. I just ordered a new RB 323 and I need some advice. Right now I have the 2.5 in my T-Maxx and when the RB comes in I need to know what I need to change inorder to get the most out of the engine. To start with I have about a gallon of TRX 20% fuel and I was wondering if this is a good fuel to use or should I switch to 30%. And if so what brand should I use. My next question is what glo-plugs should I use. Again I have several Duratrax LR3 Hot plugs that were designed for use in the 2.5. Any input on the best plug would be great. The last thing is the air filter. I have the factory 2.5 air filter but I would think that the larger engine is going to need more air than this can supply. Any advice that I can get would be great. Thanks for the help. Posts: 7 | From: Del Haven N.J. | Registered: Mar 2005
| IP: Logged
posted
We suggest you start with the 20% nitro fuel and maybe later switch to more nitro later. Concerning the glowplugs, we suggest you use #01055-TRX, these glowplugs are specially designed for this engine. We have used the original airfilter without any problems, however if there is a lot of dust around you could try a 2-stage airfilter for more protection.
posted
Thanks Rody, its good to know that the TRX fuel will not go to waste. I am new to the RB forum and its great how fast you got back to me. Thanks again for the help. Posts: 7 | From: Del Haven N.J. | Registered: Mar 2005
| IP: Logged
posted
I was just looking on the internet for the glow plugs that Rody said to use and I had no luck. Does anyone know were to find them.
Posts: 7 | From: Del Haven N.J. | Registered: Mar 2005
| IP: Logged
UBBFriend: Email this page to someone!
![[Confused]](confused.gif)
![[Smile]](smile.gif)
