posted
I am having problems tuning the tm323. I just finished breaking it in yesterday. It is sluggish on the bottom end, and I still can't get it to shift into second gear. When I lean it out it starts to cut out and I can't get it started. When it first starts it stays idling fairly well, but when it either warms up or fuel level gets low, it stalls and is hard to start again. I am running 20% eliminator fuel, traxxas glow plug (rb plug had air leak). The engine temperature starts out stable, then becomes eratic. Please any advice on what to do next would be appreciated.
I have watched video's of other revo's w/tm323 and mine doesn't run anything like them.
Posts: 1 | From: Trinidad, Colorado | Registered: Mar 2005
| IP: Logged
posted
It is always hard for us to solve these kind of tuning problems you are encountering in this way and so suggest you ask your LHS or Dealer from who you have purchased the engine from for assistance.
It might be a simple tuning problem or maybe your fuel is not suitable for this engine, we noticed that a good quality fuel is important for good performances.
We encountered some tuning problems when the fueltank of the REVO gets empty, but this is then related to the fueltank and not the engine.
Also if you run your engine to lean, it starts to act also weard and so do not go too lean.
UBBFriend: Email this page to someone!
