The rb 728 backplate (01900-123) comes with a pin for converting the 928 to a roto start motor. Can you please tell me how long and how think that pin is. Can you also tell me how far that pin slides into the end of the crank and does it need to be pressed in.
posted
The part# of the pin is 1900-123-5, the size is 2.5x11.8 and fits inside the hole of the crankpin of the crankshaft of the TM928, no force is needed to put or keep this pin in place.
UBBFriend: Email this page to someone!
