posted
Probably A-main hobbies or one of the other popular online rc stores.3 hours ! you must have run-in a .12 engine.Only takes 3 hours a gallon constant running for me when i do .21-.28 engines.
So i take it you let it run constant at a set temp and kept it there and the temps started to drop around the half gallon though, sounds good,Should run like a TOP and idle like a cadillac.How do the internals look compared to other methods you used to run in the engine ? Should look much more even and uniform.Can't believe it took 3 hours for half gallon though.
[ 10. June 2008, 02:24: Message edited by: lst123 ]
Posts: 56 | Registered: Aug 2007
| IP: Logged
posted
it was the TM728. i didn't really time it, so it could have been 2 - 2 1/2 hrs. yeah just kept re-filling the tank to keep it running. kept the temp around 230 - 240 with tin foil around head. after that i drove the car easy doing some heat cycles. don't really have anything to compare too, but i have looked in the exhaust port while at btc and its shinny in there then moved the piston up to see, no bad marks. i got plenty of power, probably need to go with some FLM ext TVP.
-------------------- Brent Hoffman Posts: 10 | From: Manchester TN | Registered: May 2008
| IP: Logged
UBBFriend: Email this page to someone!
![[Wink]](wink.gif)
Your welcome.
