RB Concept Forums: Carb restrictors for 928

»	RB Concept Forums » RB Concept .28 engines » Carb restrictors for 928

UBBFriend: Email this page to someone!

Author

Topic: Carb restrictors for 928

bluesilver
Member

posted

G'Day, Has anyone used these carb restrictors on there 928 or any RM Motors?

I have a 9mm and a 8mm Restrictor that I am going to try out in my 928.

I have been running it without any restrictors and thought I might give them ago.

The question is how do you set the throttle?
At the moment as i haven't got any restrictors in I have the servo set so that it opens just to full throttle.

Do I leave it set here even when running the 8mm restrictor (smaller opening) or do I bring it back for the smaller opening?

Hope this makes sense.
Any information is appreciated.

--------------------
I would rather lose going fast enough to win than win going fast enough to lose.

Posts: 57 | From: Australia | Registered: Oct 2005 | IP: Logged

RB Products - Rody
Administrator

posted

When using the restrictors, no nee to change the throttle settings, the throttle should always open on its maximum position.

--------------------
Do not forget to check out our FAQ section!

Posts: 5389 | From: Allevard, FRANCE | Registered: Jul 2002 | IP: Logged

bluesilver
Member

posted

Ok, Thanks.

--------------------
I would rather lose going fast enough to win than win going fast enough to lose.

Posts: 57 | From: Australia | Registered: Oct 2005 | IP: Logged

UBB.classic™ 6.7.2