RB Concept Forums Post New Topic  Post A Reply
my profile | directory login | search | faq | forum home

  next oldest topic   next newest topic
» RB Concept Forums » RB Concept .28 engines » 928 stalls after re-fuleing.

- UBBFriend: Email this page to someone!    
Author Topic: 928 stalls after re-fuleing.
TheeDog
New Member


Icon 1 posted      Profile for TheeDog     Send New Private Message       Edit/Delete Post 
Almost every time I pit unless my pit man is un-godly fast I will stall after I leave the pits. engine runs strong (after it warms up). Temps are fine around 240 I use a hot glow plug and 30% fuel, yes there is a shim in it. Any idea's!! I have tried different lengthts of pressure line fuel tubing.
Posts: 7 | From: Painesville, OH | Registered: Oct 2004  |  IP: Logged
RB Products - Rody
Administrator


Icon 1 posted      Profile for RB Products - Rody         Edit/Delete Post 
This will happen when fuel is being spilled onto the engine. Use the RB Concept fuel-gun and normally these problems will go away.

--------------------
Do not forget to check out our FAQ section!
Posts: 5412 | From: Allevard, FRANCE | Registered: Jul 2002  |  IP: Logged
TheeDog
New Member


Icon 1 posted      Profile for TheeDog     Send New Private Message       Edit/Delete Post 
No fuel is being spilled on the engine. Maybe this will help my engine sometime will also (not always) when I come of a jump while my truggy is in the air the engine will rev up since there is no load on the tires. This will cause for some hairy landings sometimes.
Posts: 7 | From: Painesville, OH | Registered: Oct 2004  |  IP: Logged
   

Quick Reply
Message:

HTML is not enabled.
UBB Code™ is enabled.

Instant Graemlins
   


Post New Topic  Post A Reply Close Topic   Feature Topic   Move Topic   Delete Topic next oldest topic   next newest topic
Hop To:


RB Products Home

Copyright 96- RB Products. All rights reserved.

Powered by Infopop Corporation
UBB.classic™ 6.7.2