Ive just orderd a (above engine) for my hyper 7, i know its MT engine but i really wanted to stick with pullstart, will this engine be ok for the hyper and also a **** exhasut, and most of all will it run rings around a hyper tq 28, as me and my mate seem to want to be faster than each other
and also would it be worth buying a spare pullstart just incase?
Thx Danny
[ 23. May 2006, 00:06: Message edited by: hyper.seven ]
-------------------- hyper 7 with an RB TM728 28 engine and **** exhaust Posts: 4 | From: east yorkshire, bridlington | Registered: May 2006
| IP: Logged
posted
oh right, think il get one of those then, just that i found when i had my savage the roto start method took along time to start it, is that just the way it is?
Danny
-------------------- hyper 7 with an RB TM728 28 engine and **** exhaust Posts: 4 | From: east yorkshire, bridlington | Registered: May 2006
| IP: Logged
I would say no. In my experience the rotary system is an alternative one beside the box, way better and more handsome than a pullstarter. There could be several things which cause the engine not to fire up immediatelly.
When your kit CB was 12T or 13T, then a 15T CB could be a bit too much. Try the kit setup and then you can see better wether just a bit more or much more (14T or 15T). This is already a big difference.
[ 23. May 2006, 20:48: Message edited by: Stefan ]
posted
Thanks. il try stock cb then and see whats its like il probably be more than happy.. i think my hyper 21 4port is fast.. iv been told it was slow :S
Danny
-------------------- hyper 7 with an RB TM728 28 engine and **** exhaust Posts: 4 | From: east yorkshire, bridlington | Registered: May 2006
| IP: Logged
UBBFriend: Email this page to someone!
![[Smile]](smile.gif)
my first RB![[Razz]](tongue.gif)
