posted
When I go from 1/4 to WOT the motor dies. I replaced the glow plug and it still does it. My temp are around 215-225. I notice the motor takes about 1-2 seconds to clear out before she totes the mail when it does go from 1/4 to full. I am running a Jammin **** pipe. I am wondering if I should just start at the factory settings? If so what are they? Thank You!
Posts: 16 | From: Va | Registered: Feb 2006
| IP: Logged
posted
No, I am running the Novarossi #c7tf(very cold?). I ordered the RB #7 and they sent me the nova's. I had the previous thread on glow plugs. Could this be my problem? Thank You!
Posts: 16 | From: Va | Registered: Feb 2006
| IP: Logged
posted
I talked to the people I bought the plugs from and they are going to send me the RB plugs I requested. Hopefully that will take care of my problems. If there is anything else that I can check please let me know.
Posts: 16 | From: Va | Registered: Feb 2006
| IP: Logged
UBBFriend: Email this page to someone!
