posted
I have decided i want an RB on my Terra Crusher, i test fitted the engine at my lhs and it should fit, the only problem is the clutch. As Tamiya uses an module 0.8 spur gear i cant fit an buggy clutch unless i find an buggy clutch bell with an module 0.8 gear. So i think i need to look at an T maxx clutch but as an stock t maxx clutch spring breaks with my os .21 i don't think it's going to work with the RB .28 So does anyone know a good solution or is there an clutch advice from RB?
Edit: My LHS has found out that SPM also makes a clutch bell and pinion that has the same module as Tamiya and Traxxas. So my problem is solved.
posted
I think the teeth are a different pitch, look into the big block conversions for the Revo and Tmaxx, you might be able to find what you need. You also might be able to find a spur that'll work with the sam Mode 1 gears that most 21's (1/8 scale) use.
Posts: 994 | From: santa rosa CA | Registered: Apr 2004
| IP: Logged
UBBFriend: Email this page to someone!
