posted
I just bought the rb .28 motor on the internet and had it installed at my hobby shop.every thing wuz going good untill my pull start brock.i whent to my hobby shop where i had the motor installed to see if i could get a new one, but found out that the store dosent sell any rb parts,meaning that the store dosent have a contract with the company so they dont sell an rb stuff.so dose any one know where i can buy a rb. 28 pull start on the internet??? i need 1 badly
Mike:)
[ 25. August 2004, 21:22: Message edited by: michael ]
Posts: 2 | From: miami | Registered: Aug 2004
| IP: Logged
Although other dealers may have these in stock as well, we can advise that Crispy Critters Hobby in New Jersey has some of these arriving to them on Thursday, August 26.
posted
order a few while you are at it. one wonèt be enough. or wait like all of us for the backplate or rotostart adaptor
Posts: 5 | Registered: Jul 2004
| IP: Logged
posted
im on my original pull staret and have over 2 gal on it.. so only need one.. just need to learn to loosen the glow plug a 1/2 turn and all will be fine.. even though people do not beleive in this idea.. im one of the few i know with a over 8 gal old 8 port pull start..
posted
Same here(Original pullstart) I did end up replacing the internal one way bearing,,due to my own fault. I have over 5 gallons thru the motor now and it still hauls the mail,,just had to train myself to warm the motor first with a heat gun,,to take the pressure off of the pullstart.
Posts: 99 | Registered: May 2004
| IP: Logged
posted
Normally where i run there is power to use a heat gun,,and yes,,there is a battery powered heat gun out there.
Posts: 99 | Registered: May 2004
| IP: Logged
UBBFriend: Email this page to someone!
![[Frown]](frown.gif)
