posted
I know that you used a Savage with the RBC 1350-63 tune pipe to test out the TM728. Do you think that RBC 1350-86 tune pipe will increased the performances of the Savage over the uses of the RBC 1350-63?
Posts: 1 | From: maryland usa | Registered: Apr 2004
| IP: Logged
posted
We have not really tested this because we found with the 063 already plenty of power but it could be that the 086 also can work quite well with this engine.
We are working on a special pipe for this engine but this takes some time and I think that there are now many impatient persons waiting for their engine...
posted
Hi Rody, I'm new to this forum and just got my tm728 for my savage.i have a couple questions. I'm not sure what header and pipe to get. I want top end. I have read through the forums and not sure what to get the 1350-86, or the 063P. Also i just got back from my LHS and he should me a THS- .25- .28 pipe With a header. Can you give me an ETA of the .28 pipe? Is it a top end pipe? Also will it come with a header that will fit the savage? Sorry for so many quastions Thanks, ACE
-------------------- ace Posts: 2 | From: spring valley ny | Registered: May 2004
| IP: Logged
posted
For the moment we have no header yet, so if you have a Savage you can use the original header with the 086 or 063 pipe. The 086 will give you more top-speed compared to the 063.
You can also increase the speed by shortening the pipe-length or play with the gear-ratio.
As for the special .28 pipe, we have made a test with a double-chamber type pipe but did not like the results so will need to look into other solutions.
UBBFriend: Email this page to someone!
![[Smile]](smile.gif)
