RB Concept Forums: C6 L2G running-in temp

»	RB Concept Forums » Running in your RB Concept engine. » C6 L2G running-in temp

UBBFriend: Email this page to someone!

Author

Topic: C6 L2G running-in temp

x-minds
New Member

posted

I just received my new C6 RB L2G and started with the running-in procedure.

The current temperature is 27ºC (80ºF) and the engine does not exceed 70ºC (158ºF) even with the heatsink wrapped.

What can I do to reach the required temperature?

[ 24. April 2008, 21:56: Message edited by: x-minds ]

--------------------
rcnews.com.ar

Posts: 8 | From: Argentina | Registered: Mar 2008 | IP: Logged

RB Products - Rody
Administrator

posted

Do not worry too much about getting the temps so high, as long as you take it easy and let the engine run rich.

--------------------
Do not forget to check out our FAQ section!

Posts: 5386 | From: Allevard, FRANCE | Registered: Jul 2002 | IP: Logged

x-minds
New Member

posted

Ok, thanks for your help Rody!

--------------------
rcnews.com.ar

Posts: 8 | From: Argentina | Registered: Mar 2008 | IP: Logged

Cvdiver
New Member

posted

I just ran my C6 L2G for the first time. I could not get any higher than 148 degrees f out of it. I understand this is not a problem for this engine. Why would it not be a problem for the L2G, but would be a problem for the C6BB7T?

By the way. I have NEVER had a new engine start on the first bump of the starter box! NEVER! This thing just wants to run! Thanks!

--------------------
Gravity, it's not just a good idea. It's the LAW!

Posts: 9 | From: Orlando, FL | Registered: May 2008 | IP: Logged

UBB.classic™ 6.7.2