posted
I am about to order a TM323 engine for my Revo, I have done some reading about the breaking in... But now I am a bit confused, in the technical sheet for the engine I am told to go with the Traxxas method for break in, but if I look at the RB "universal break in instructions" its another story... The Traxxas method wil take about 6 tanks of fuel, and the universal method used a lot more fuel....
So which method is the best ??
Last which glowplug shuold is use (not just breakin), the RB glowplug are kind of hard to get here in DK (there is only one dealer)
Posts: 40 | From: Denmark | Registered: Apr 2006
| IP: Logged
posted
We suggest to use the Traxxas method for these engines because we made them in this way that they can support this method.
As said many times in this forum, if you can get the engine then you should also be able to get the parts, if not then this is not the right dealer to buy your engine from if he is not willing to support the spare-parts too.
posted
Ok thx Rody, I will go by the Traxxas Method then... regarding the glowplugs I was just thinking that you might would suggest some other brands than RB... I guess I would be best of whit "your" glowpugs then......
UBBFriend: Email this page to someone!
