RB Concept Forums Post New Topic  Post A Reply
my profile | directory login | search | faq | forum home

  next oldest topic   next newest topic
» RB Concept Forums » Running in your RB Concept engine. » Mistake @ Running-In??

- UBBFriend: Email this page to someone!    
Author Topic: Mistake @ Running-In??
Bateman
New Member


Icon 1 posted      Profile for Bateman         Edit/Delete Post 
Hello,

today I made my first run-in. Just a Short question:

For the first tank you should run stationary with low rpm. But what means low rpm. Carburator at idle means open 0,8mm oder means idle when half open ??

Thanks
Best Regards
Nick
Posts: 6 | Registered: May 2003  |  IP: Logged
Van Buynder Stefan
Very Active Member


Icon 1 posted      Profile for Van Buynder Stefan     Send New Private Message       Edit/Delete Post 
1st tank is at 0,8mm open but there must come some unburnt fuel coming out of the exhaust pipe and it could be that you have to nudge the throttle a little to keep the engine running. Because of the high needle setting it can be that the carb will be flooded.
Posts: 124 | From: Zwijndrecht, BELGIUM | Registered: Jul 2002  |  IP: Logged
Bateman
New Member


Icon 1 posted      Profile for Bateman         Edit/Delete Post 
Thank you very much
Posts: 6 | Registered: May 2003  |  IP: Logged
   

Quick Reply
Message:

HTML is not enabled.
UBB Code™ is enabled.

Instant Graemlins
   


Post New Topic  Post A Reply Close Topic   Feature Topic   Move Topic   Delete Topic next oldest topic   next newest topic
Hop To:


RB Products Home

Copyright 96- RB Products. All rights reserved.

Powered by Infopop Corporation
UBB.classic™ 6.7.2