posted
I was woundering what clutch setup most people are using on there buggy? Ijust finished my mugen mbx xr with the WS7 motor and i have read that the WS7likes the 1.1 clutch spings or to go with a 4 shoe clutch because the WS7 laks a little lowend punch Thanks
Posts: 4 | From: USA | Registered: Feb 2003
| IP: Logged
posted
The WS7 does not have a lack of low-end punch, however if the clutch comes in too early or your gear-ratio is too long for the track you are driving on, yes indeed then it will look like the engine has no low end power.
Read a little through this forum, many clutch discussions and topics have been handled and I am sure you can find some answers there...
posted
Hey man just put in a Nuova Faor clutch, (complete with flywheel and 3 nylon/carbon shoes), and thatīs it, all the lower end punch you can want.
Posts: 29 | From: Portugal | Registered: Jul 2002
| IP: Logged
posted
well i bought some new Nuova Faor clutch shoes and springs for a 4 shoe setup off ebay but i cant find anyplace that carrys the Nuova Faor flywheel that i need. If you knows a place that carry's them please post it i would love to know. Thanks Jeremy
Posts: 4 | From: USA | Registered: Feb 2003
| IP: Logged
posted
That is a problem see, i live in Azores a small group of island's near Portugal and i got my clutch there, but let mee tell you that the kind of clutch i was refering to is alredy with flywheel. If you alredy have the clutch springs and shoes,(both are more important), then just use a regular flywheel.
Posts: 29 | From: Portugal | Registered: Jul 2002
| IP: Logged
What Noav Fuor clutch do you run?? I have seen they have a new clutch/flywheel/spring setup with either red, black, or white shoes. What is best with the WS7? I would like a higher RPM clutch engagement.
UBBFriend: Email this page to someone!
![[Smile]](smile.gif)
