RB Concept Forums: Bearing Tool

»	RB Concept Forums » RB Concept .12 engines » Bearing Tool

UBBFriend: Email this page to someone!

Author

Topic: Bearing Tool

Big Dog
Very Active Member

posted

Does RB make a removale/installation tool for the motor bearings on .12 size engines?

--------------------
MP777 SP2
RB WS7III w/ RB 2045
MP777 ST-R Truggy
RB WS7II
www.crcrc.com
Check it out!!!

Posts: 300 | From: Columbus, Ohio | Registered: Apr 2004 | IP: Logged

RB Products - Rody
Administrator

posted

For what engines do you want to use this?

--------------------
Do not forget to check out our FAQ section!

Posts: 5328 | From: Allevard, FRANCE | Registered: Jul 2002 | IP: Logged

Big Dog
Very Active Member

posted

an rb .12 C12 should be for any .12 size engines also. There is not many different sizes avalible is there? I know the .21 have a bearing size of 13 and 14 mm.

--------------------
MP777 SP2
RB WS7III w/ RB 2045
MP777 ST-R Truggy
RB WS7II
www.crcrc.com
Check it out!!!

Posts: 300 | From: Columbus, Ohio | Registered: Apr 2004 | IP: Logged

RB Products - Rody
Administrator

posted

C12 has an 11mm crankshaft, so a main-bearing with an 11mm inner ring.

Our removal tools start a 11.5mm, so you have to use the old method(see FAQ in our website) to get the main-bearing out. However we have a tool to mount the bearing part# 01700-075-11 but unfortunately not in stock for this moment.

--------------------
Do not forget to check out our FAQ section!

Posts: 5328 | From: Allevard, FRANCE | Registered: Jul 2002 | IP: Logged

UBB.classic™ 6.7.2