Do you know what pipe would be a good match for the RB Speedline Matrix R .12, running in a Serpent 720?
-------------------- XB808 C6 L2G XT8 Ninja 21 KO Propo - Spektrum Pro Hitec Byron Mirage Racing Team Posts: 14 | From: UK | Registered: Oct 2006
| IP: Logged
Do you have any idea where to get hold of this pipe set E1751-195401 in the UK? I've noticed you do not have a distributer in the UK?! Does that mean you are looking for one?
Am I also right in thinking this set is a combination of the 401 pipe and 195 header?
Thank you in advance
-------------------- XB808 C6 L2G XT8 Ninja 21 KO Propo - Spektrum Pro Hitec Byron Mirage Racing Team Posts: 14 | From: UK | Registered: Oct 2006
| IP: Logged
posted
Also, do you have any information on your site about the RB Speedline Matrix R .12?
I can't seem to find any information anywhere on the internet yet
-------------------- XB808 C6 L2G XT8 Ninja 21 KO Propo - Spektrum Pro Hitec Byron Mirage Racing Team Posts: 14 | From: UK | Registered: Oct 2006
| IP: Logged
This pipe combination should be available in your country, and yes you are right with what the combination is.
We are waiting for the final production to arrive, as soon as this has arrived then we will publish all the information about the Matrix on our website.
posted
Does that mean I have bought a pre-production sample? It was bought from microtechracing.com in the UK
-------------------- XB808 C6 L2G XT8 Ninja 21 KO Propo - Spektrum Pro Hitec Byron Mirage Racing Team Posts: 14 | From: UK | Registered: Oct 2006
| IP: Logged
posted
Hi Rody We have a question with the carburetor factory settings,8 turn from clsed,idle 1 turn from closed and spray bar 3/4 turn from closed.I use a Rb/Sirio 2611 pipe and rb 16% fuel at sea level with 0.3mm head shim but the engine is to hot and dont work well. Please put the carburetor setup all the matrix R & RW users.
posted
Dear Rody: Have a question fron the land of the Incas. On the manual for the matrixRW, you suggest to change the main bearing after every hour of race? What is the service life of the main bearing?(I know it depens of many factors but for a person that taques all the fuel of the crankcase and use afterrun oil, and take apart the engine every month for cleaning) Thanks and looking forward
Posts: 3 | From: Lima PERU | Registered: Jan 2007
| IP: Logged
posted
Maybe the wording should be check and not forceably change..., our experience is that the main-bearing of the .12 engines are more sensible then the main-bearings of the .21 engines and that it could be better to check these on more frequent times. If the bearing still feels smooth then no need to change.
posted
Hi i just pick up a rb matrix 12 can any one tell me what shiming should use with 30% fuel thanks Carl
Posts: 2 | From: New Haven Ct | Registered: May 2007
| IP: Logged
posted
Are the shims use in the matrix the same shims use for the v12 series? I have shims for the v12 and I tried to use the on the matrix and they don't fit.
-------------------- Yokomo Gt-4 RB Concept V12 Posts: 39 | From: Puerto Rico | Registered: Oct 2005
| IP: Logged
UBBFriend: Email this page to someone!
