posted
hi rody,i just got a new set of v12 5p p/s and fixed into my x12 5p..im running with 25%nitro do i need to add a 0.1 shim? what plug will be good 6 or 7 and hope you would guide me with some run in procedure...does the v12 5p p/s perform better than x12 5p p/s in that x12 cranksase? tks...
Posts: 1 | From: singapore | Registered: Aug 2006
| IP: Logged
posted
No need to add the extra shim while using 25% nitro. I suggest you use the No. 6 glowplugs, but if it is very hot you can always try a No. 7
Use the universal running-in guidance you can find on our support pages in our website.
The P/S between the X12 and V12 have not really changed, the main change was the crankshaft, so you should not really find a difference in performances except that your P/S is new and so the engine will work better.
UBBFriend: Email this page to someone!
