posted
Hi, I won a Mugen MST-1 1/10th scale off road truck and decided I may start racing it. I want to be sure the engine I am considering will be a good fit in one of these trucks as it looks like all of RB's .12's are designed for onroad.
The engine I am considering is the V.12 (RBC1700-000400) I will also need an exhaust system for the truck and I was curious if the 1 piece exhaust systems would work... Guess I just need some direction as I have never run these trucks or engines and nobody at my track that runs 1/10th scale runs RB.
Posts: 372 | From: Colorado, usa | Registered: Apr 2005
| IP: Logged
posted
You can also use the V12 engines in the MST, even the in-line system is possible. The only thing we suggest with the in-line system is to use the longest manifold possible on these engines since the truck will be heavier then the on-road cars.
posted
Good deal, thanks Rody!!!! One more question.... Do you make the V.12 Rody with a standard crank? All I can find is the SG crank on the Rody version. If so whats the part number?
posted
No problem... thank you for the response!!! I doubt I would be able to control a 2 wheel drive truck on dirt with that much power anyway.
Posts: 372 | From: Colorado, usa | Registered: Apr 2005
| IP: Logged
UBBFriend: Email this page to someone!
