posted
I HAVE THE OLDER X12 ENGINE,BRAND NEW...I WAS PUTTING AFTER RUN OIL IN THE CARB AND WHEN I WAS TURNING THE PISTON UP AND DOWN TO GET THE OIL INTO THE ENGINE,I FELT THAT IT WAS KINDA HARD TO TURN FROM LEFT TO RIGHT,COULD SOMETHING BE WRONG WITH THIS NEW ENGINE?CHOCO
-------------------- SERPENT 950R-NOVAMEGA EVO5 MS SERPENT 710-RB X12 SERPENT 705-NOVAMEGA EVO4 3 PORT KYOSHO 7.5-RB S5 Posts: 26 | From: HOUSTON,TEXAS USA | Registered: Aug 2004
| IP: Logged
posted
This is normal, because the piston of these engines do not have a segment and the sleeve is slightly tapered it is normal that when the engine is new the piston is hard to pass at the TDC
Please use the search engine of this forum also, there are quite some topics on the questions you are asking here.
UBBFriend: Email this page to someone!
