posted
I am looking for recommendations on engines for the 1/10th 235 mm class. I have decided to go with RB engines but I am not very familiar with the differences between them and which ones are ROAR legal. Do they have a ROAR legal Rody tuned .15??? Any help would be greatly appreciated. Thanks.
Posts: 1 | From: North Carolina | Registered: May 2003
| IP: Logged
posted
The only ROAR legal engine we have in our program is #1602-C, no extra tuning is available, except for the Concept-Coating which increases the life and reduces the friction of the big-end conrod combination.
posted
It depends on which 1/10 235mm clas you will be running. If your going to run the 1/10 235mm 4wd class then anything goes as long as it's .15 in size, no ceramic bearings. I do belive that is the only restriction for the outlaw 4wd class.
Now if you will be running the 2wd class it will have to be a roar legal .15 engine. Maximum 3 intake, 1 exhast port. There is a minimum exhast port height. The outlet diameter of your pipe cannot exceed 5mm.
There are other restrictions i'm perty sure of. Check out www.roarracing.com and download the rules and regulations.
UBBFriend: Email this page to someone!
